A buttery top end with a progressive bottom end, could you ask for more?
5.0
(5 reviews)
Type * — Select the 'Type' first
From
$495.00
Product Details
For the first time, we created an air spring with a truly better spring rate, everywhere in the travel, than a coil. The Secus upgrade delivers the first and only air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.
Features:
- An enlarged negative air spring chamber delivers a soft, supple initial stroke for ultimate small bump compliance (yes, even compared to the Luftkappe)
- Proprietary Midstroke Support Valve improves predictability and support beyond the sag point
- Reduced lower leg pneumatic ramp means better scalability of the air spring, particularly for light riders who previously struggled to use full travel
- Plush and predictable like a coil, bottomless like an air spring
- Allows full use of travel in both directions - fully extends to topout without any quibbles (including on Debonair B1 air springs) and fully compresses without excessive ramp
- Allows more lower leg bath oil to be used for superior lubrication
- Considerably lighter than coil conversions - adds approximately 130g
- Simple setup - inflate fork, bounce on it a few times, press MSV charge button, go ride
- Compatible with OEM volume spacers for end-stroke progression adjustment
- Compatible with other aftermarket top-cap systems such as DSD Runt and MRP Ramp Control
- Lower compression ratios mean a more consistent spring rate
- Transferrable between any Secus-compatible forks with only a footstud to change at most
COMPATIBILITY:
| Fork | Year & Specification | Secus Variant |
| Fox 32 | 2018+ (unless footnut on spring side is recessed) | Fox A1 |
| Fox 34 | 2018+ (unless footnut on spring side is recessed) | Fox A1 |
| Fox 36 | 2018+ | Fox A1 |
| Fox 38 | 2021+ | Fox A2 |
| Fox 40 | 2018+ (Note: Installation tool sold here, air spring is difficult to disassemble) | Fox A3 |
| Fox 32 StepCast | Not Compatible | |
| Fox 34 StepCast | Not Compatible | |
| Marzocchi Z1 | 2019+ | Fox A1 |
| Rockshox Pike / Revelation (2014-2018) | Requires 2019-20 (B1/B2) Debonair Airshaft update to be directly compatible, or you may use the (2021) C1 Debonair Airshaft and replace the sealhead. The BIP (Bananas in Pyjamas) B1/B2 sealheads can be included in the kit by selecting the dropdown option in 'Tools Required', and may also be purchased separately here. Secus is not compatible if air side footbolt is recessed in the lowers (some 2018 forks). | Rockshox A2 |
| Rockshox Pike / Revelation (2019-2020) | Compatible unless footbolt on spring side is recessed. No replacement sealhead needed if using stock air shaft (B1/B2). | Rockshox A2 |
| Rockshox Pike / Revelation (2021+) | Requires 2019-20 (B1/B2) Debonair Airshaft update to be directly compatible, or you may use the (2021) C1 Debonair Airshaft and replace the sealhead with the BIP (B1/B2) sealheads. The BIP (Bananas in Pyjamas) B1/B2 sealheads can be included in the kit by selecting the dropdown option in 'Tools Required', and may also be purchased separately here. | Rockshox A2 |
| Rockshox Lyrik / Yari (2016-2018) | Requires 2019-20 (B1/B2) Debonair Airshaft update to be directly compatible, or you may use the (2021) C1 Debonair Airshaft and replace the sealhead with the BIP (B1/B2) sealheads. The BIP (Bananas in Pyjamas) B1/B2 sealheads can be included in the kit by selecting the dropdown option in 'Tools Required', and may also be purchased separately here. | Rockshox A2 |
| Rockshox Lyrik / Yari (2019-2021) | Compatible. No replacement sealhead needed. | Rockshox A2 |
| Rockshox Zeb (2021+) | Compatible. No replacement sealhead needed. | Rockshox A2 |
| Rockshox Boxxer (2019+) | Compatible. No replacement sealhead needed. | Rockshox A2 |
| Any year forks with 35mm C1 (2021+ style) air shaft kit installed (This does not apply to 38mm Zeb air shafts) | Requires Bananas In Pyjamas (BIP) Sealhead to be installed. The BIP (Bananas in Pyjamas) B1/B2 sealheads can be included in the kit by selecting the dropdown option in 'Tools Required', and may also be purchased separately here. |
